Heavy-Duty Servo Variable Frequency Drive 5.5-800kW 3-Phase 380V IP55 Waterproof Design

Heavy-Duty Servo Variable Frequency Drive: 5.5-800kW 3-Phase 380V, IP55 Waterproof Design

I. Core Performance Specifications

1. Power & Voltage
   • Rated Power: 5.5-800kW, suitable for medium-load equipment (e.g., conveyor belts, packaging machines, fans, pumps).
   • Input Voltage: Three-phase 380V ±15%, compatible with domestic industrial power grids and voltage fluctuation environments.
   • Output Frequency: 0–650Hz (vector control mode), meeting high-speed start/stop requirements (e.g., logistics sorting lines).
2. Protection Rating
   • IP55:
     • Dustproof: Fully prevents dust ingress, ensuring clean internal components.
     • Waterproof: Withstands low-pressure water jets from all directions (e.g., workshop cleaning, humid environments), but avoid prolonged submersion.
   • Applicable Scenarios: Water treatment plants, wastewater treatment facilities, metallurgical plants, and other industrial settings with heavy dust or moisture.
3. Control Modes
   • Sensorless Vector Control (SVC):
     • Decouples motor magnetic flux and torque for high low-speed torque output (e.g., heavy-load conveyor belt startups).
     • Dynamic response time ≤50ms, quickly suppressing overshoot (e.g., smooth restarts after emergency stops).
   • V/F Control:
     • Proportional voltage-to-frequency adjustment for fans, pumps, and other applications with relaxed speed accuracy requirements.
   • Encoder Feedback Support:
     • Enhances speed control accuracy (error ≤±0.5%) via pulse signals or encoder feedback, ideal for positioning tasks (e.g., sorting cart stop positions).

II. Key Features

1. Intelligent PID Control
   • Multi-Loop Regulation:
     • Speed Loop: Real-time correction of motor speed to counteract load fluctuations (e.g., impact from packaging machine filling stages).
     • Tension Loop: Automatically adjusts conveyor belt or rolled material tension when paired with tension sensors (error ≤±1%).
     • Position Loop: Supports pulse inputs (e.g., PLC signals) for precise positioning (accuracy ±0.01mm).
   • Adaptive Algorithm: Automatically tunes P/I/D parameters based on load changes, reducing manual debugging errors.
2. One-Click Auto-Tuning
   • User-Friendly Operation: Users select load type (constant torque/variable torque) and press "Auto-Tune" for automatic motor parameter identification (resistance, inductance, inertia) and optimal control curve generation.
   • Tuning Time: ≤2 minutes, improving efficiency by 80% compared to manual debugging.
   • Scenario Adaptability: Supports light-load (empty conveyor belts) and heavy-load (fully loaded packaging lines) startup modes.
3. Communication & Expansion Interfaces
   • Multi-Protocol Support: Built-in Modbus RTU/TCP, CANopen, EtherCAT, and other industrial protocols for seamless integration with PLCs, HMIs, or supervisory systems.
   • IO Expansion: Standard 8 digital inputs/6 digital outputs (expandable to 16) for complex logic control (e.g., multi-conveyor synchronization).
   • Analog Inputs: 4-20mA/0-10V signal compatibility with legacy sensors.

III. Typical Applications

1. Conveyor Belt Synchronization
   • Pain Point: Speed mismatches across multi-segment conveyors due to uneven loads cause material pile-ups or breakage.
   • Solution:
     • Master-Slave Control: The master VFD drives the first conveyor segment, while slave VFDs synchronize via pulse tracking or encoder feedback.
     • Dynamic Speed Adjustment: Automatically adjusts conveyor speed based on material detection sensors (e.g., photoelectric switches) for variable acceleration in sorting lines.
2. Packaging Machinery Tension Control
   • Pain Point: Rolled materials (e.g., films, label paper) are prone to breakage or slack during acceleration/deceleration.
   • Solution:
     • Install tension sensors to monitor rolled material tension in real-time. PID closed-loop control adjusts VFD output frequency to maintain constant tension (e.g., during sealing stages in bag-making machines).
     • Combine with dancer rollers for active tension compensation via torque mode.
3. Logistics Sorting Line Position Tracking
   • Pain Point: Sorting carts require precise docking at designated stations; traditional open-loop control leads to positioning errors.
   • Solution:
     • VFD receives pulse signals from PLC and uses position closed-loop control to drive servo motors for high-precision stopping (e.g., cross-belt sorters).
     • Supports S-curve acceleration/deceleration to reduce mechanical shock and extend equipment lifespan.

For technical details, please contact us for remote support

IP55 Waterproof Servo Variable Frequency Drive

Heavy Duty Servo Variable Frequency Drive

800kW Servo Variable Frequency Drive

Heavy-Duty Servo Variable Frequency Drive 5.5-800kW 3-Phase 380V IP55 Waterproof Design Images